Contact Us‎ > ‎

Address and Directions

This page is archived. You weren't meant to find. It's information may be outdated. The menu above will get you back to offical site pages.

O'Brien Compliance Management, LLC 
73 Princeton St, Ste 207 
North Chelmsford, MA, 01863, USA

OBCM Office (A) from Route 3 exits.

From NH (points North of Chelmsford), from Route 3take exit 33 to Route 40, Groton Rd toward North Chelmsford, to light in North Chelmsford village.  At light, take right onto Route 3A South, stay right at fork staying on Route 3A South, Princeton St.  The Mill (A) is on Right, with The Establishment Restaurant (formerly Aprile's European).  Head to back of The Mill, parking near West Entry (see satellite view below).  OBCM office is on 2nd Floor, Suite 207.

From points South of Chelmsford, from Route 3take exit 32 to Route 4, North Rd.  North Rd becomes Princeton St after Route 3A merger.  The Mill (A) is on Left, with The Establishment Restaurant (formerly Aprile's European).  Head to back of The Mill, parking near West Entry (see satellite view below).  OBCM office is on 2nd Floor, Suite 207.

 

OBCM Office (A) from Interstate 495, Route 3, and Lowell Connector interchange. 

From Interstate 495 (north or south)take exit 35B to Route 3 North.  From Route 3, take exit 32 to Route 4, North Rd.  North Rd becomes Princeton St after Route 3A merger.  The Mill (A) is on Left, with The Establishment Restaurant (formerly Aprile's European).  Head to back of The Mill, parking near West Entry (see satellite view below).  OBCM office is on 2nd Floor, Suite 207.


obcm office
Satellite view showing way to OBCM office at West End mill entrance at far end of street entrance





Sign at 73 Princeton St entrance
The Mill from 73 Princeton St entrance.  
Offices are located in the center of the building, on the 2nd floor.
From all directionsdrive into the 73 Princeton St entrance, and drive to far end, the West Entry.  Park.  Walk into West End entrance.  Use elevator to 2nd floor.  We're midway in the building, Suite 207, on right hand side.

 
West End mill entrance

Important: If you're attending safety IEC 60601 or EMC IEC 60601-1-2 (or other) training, this is held in Function Room of The Establishment Restaurant (old name, April's European).  Once at Mill, must go to restaurant, and Function Room upstairs.